· Listen
The simple version
A figure that turns up every week in energy coverage, and in plenty of general news, is a tally of drilling rigs that are currently working. It is quoted with the weight of an official statistic.
It is not one. It is kept and published by a company that sells to the drillers it is counting, and it has run that way since 1944 as a trade publication rather than a public statistic.
That is not a criticism of the figure, which is careful and has run for decades. It is a reason to take it as what its keeper says it is: a measure of how much drilling work is under way, which is a measure of demand for what that keeper sells.
The numbers
- The source is the Baker Hughes rig count overview page, at rigcount.bakerhughes.com, read November 20, 2026. The counts below are the ones that page carried on that date.
- The United States figure. The last count, dated 20 Nov 2026, is 607. That is 6 higher than the prior count of 13 Nov 2026 and 53 higher than the count of 21 Nov 2025.
- The Canadian figure. The last count, also dated 20 Nov 2026, is 231, which is 2 lower than the prior count of 13 Nov 2026 and 36 higher than the count of 21 Nov 2025.
- The international figure, and the reason it does not belong in the same sentence as the other two. It is 1111 for Oct 2026, 11 lower than Sept 2026 and 52 higher than Oct 2025. It is a monthly figure on a different clock, and the month it describes closed before the weekly figures above were taken.
- The cadence, in the keeper's own words. The page states that the North American rig count is released weekly at noon Central Time on the last day of the work week, and that from February 2020 the international count is released on the last working day of the first week of the month.
- How far back it runs. The page states that the company has issued rig counts as a service to the petroleum industry since 1944, when weekly counts of United States and Canadian drilling activity began, and that the monthly international count started in 1975.
- What the keeper says the figure is for. The page describes the counts as a business barometer for the drilling industry and its suppliers, and states that the active rig count acts as a leading indicator of demand for products used in drilling, completing, producing and processing hydrocarbons.
- Who the keeper says uses it. The page states the counts are published by major newspapers and trade publications and are frequently referenced by journalists, economists, security analysts and government officials.
- Where part of the underlying information comes from. The page states that the working rig location information is provided in part by a named third party data firm.
- That the method can change, and has. The page carries a notice that from January 2024 the way rigs in one country are counted was updated to include only operating rigs there, which it states raises both that country's figure and the worldwide one, and it tells users of older data to download earlier periods again to avoid errors.
- That the weekly timing is not fixed either. The page lists three dates in the coming weeks when the North American count will be published on a Wednesday rather than its usual day because of holidays.
- For why a drop in drilling does not show up at the pump the following week, see our piece on why gas prices lag crude oil.
Why a count of machines is not a measure of oil
The figure counts rigs that are turning. A rig is a machine that bores downward, and the boring is not the oil, so the count is a measure of activity rather than of anything brought up.
The gap between the two can run for years. A given rig can drill faster, drill more wells from one pad, or drill into better rock than the rig counted a decade earlier, so the same tally can sit behind very different amounts of oil.
There is a lag on top of that. A well being drilled this week is not fuel this week, and the delay between the two is measured in months, which is why a weekly tally and a weekly fuel price move for different reasons.
The keeper is clear about all of this in its own framing. It calls the tally a barometer for the drilling trade, and a leading measure of demand for drilling goods, which is a statement about orders rather than about what comes out of the ground.
The actual math on the three figures
Take the weekly move first. The United States figure of 607 is 6 higher than the week before, so the prior week was 601 and the change is about 1.0 percent.
The move against a year earlier is the larger one and it is easy to read as small. At 53 higher than that point, the earlier figure was 554, so the rise is about 9.6 percent, or nearly ten times the weekly move.
Now the dates, which is where the arithmetic most often goes wrong. The two weekly figures add to 838 for North America, and both carry the same date, so that total is sound.
The third figure does not join them. It is stamped with a month that ended before either weekly count was taken, so adding it to the other two produces a total that never existed on any single day.
The 601 and 554 back-figures, the 1.0 percent and 9.6 percent moves, and the North American total of 838 are ours. The 607, the 231, the 1111, every change and every date are the keeper's own.
What this means
When a figure is quoted weekly and treated as data, the first question is who keeps it and why. A number can be careful, consistent and useful and still be a trade service rather than a public statistic, with no agency behind it and no published revision policy.
The second habit is to take the keeper's own description of what a figure measures over the use a headline puts it to. This one is described as a demand barometer for drilling work, and reading it as a signal about fuel prices asks it to do a job its keeper never claimed for it.
This article explains what one weekly energy figure counts and who publishes it, and reports the figures carried on one date. It is general education, not investment advice, and it is not a forecast of energy prices, fuel prices or any company's results.
What this is NOT
This article explains that the weekly rig tally widely quoted in energy coverage is compiled and published by a private oilfield services company rather than by a government body, and that its keeper describes it as a barometer of demand for drilling goods and services, using the figures carried on the keeper's overview page on November 20, 2026 as its example. It is not a claim that the figure is wrong, inflated, misleading or badly kept: the keeper publishes its cadence, its history, its stated purpose, its method changes and the fact that part of the underlying location information comes from a third party, all on the same page, which is the opposite of concealing them. It is not a suggestion that the figure is unreliable because a company publishes it, and we did not test its accuracy. It is not a forecast of oil prices, natural gas prices, pump prices, drilling activity or any future reading of this or any other count. It is not advice about any security, fund, commodity or sector, and in particular it is neither a view on nor a recommendation about the company that publishes the figure, any company it counts, any energy company, or any fund holding them. It is not a view on energy policy, climate policy, drilling policy or any related political question, and no such question is addressed here. We name no individual at the publishing company or anywhere else. Only the keeper's own overview page was read for this piece: we did not open the weekly data files, we did not read the methodology FAQ, and we did not check the figures against any other source. Ours are the 601 and 554 back-calculated prior figures, the 1.0 percent weekly and 9.6 percent yearly moves, and the North American sum of 838; the 607, the 231, the 1111, every stated change, every date and every description of purpose are the keeper's. This is not a political endorsement or criticism of anyone.
Sources
- Baker Hughes, Rig Count Overview and Summary Count, at rigcount.bakerhughes.com/rig-count-overview, read November 20, 2026, for the United States count of 607 dated 20 Nov 2026 with its changes of 6 and 53, the Canadian count of 231 with its changes of 2 and 36, the international count of 1111 for Oct 2026 with its changes of 11 and 52, the weekly and monthly release cadences, the 1944 and 1975 start dates, the stated purpose as a business barometer and leading indicator of demand, the statement of who references the counts, the attribution of working rig location information in part to a third party, the January 2024 method change notice, and the holiday publication dates.
- Baker Hughes, North America Rig Count page, at rigcount.bakerhughes.com/na-rig-count, read November 20, 2026, for the presence of a North America Rig Count Report dated 11/20/26. The underlying weekly data file was not opened and no figure here is taken from it.
Receipts2 receipts: the source's own words, with a link to eachShowHide
The active rig count acts as a leading indicator of demand for products used in drilling, completing, producing, and processing hydrocarbons
Baker Hughes, Rig Count Overview and Summary CountRead Nov 20, 2026Open the source (opens in a new tab)The working rig location information is provided in part by Enverus
Baker Hughes, Rig Count Overview and Summary CountRead Nov 20, 2026Open the source (opens in a new tab)
Found this useful?